WANLONG
Granite is a very popular stone on the market at present, and it is favored by consumers. During the cutting process, many friends are asking how to better cut granite.
In the current market, there is a diamond cutting wire saw. Its appearance makes cutting granite easier. Here is an introduction to the advantages of diamond cutting wire saws for cutting granite stone?
1 is wide adaptability
Wire saws are suitable for all types of mines, while flame cutting is only suitable for granite mines with high quartz content and few cracks;
2 is powerful and efficient
First, the mining depth is deep, which can reach 10-20m or even deeper, and the flame cutting is generally only within 10m;
Secondly, the cutting speed is fast, generally reaching 3~4m2/h, which is 2~3 times that of flame cutting;
3 The wire saw can cut vertically, horizontally, inclined planes and other directions dryly.
Blind cutting can also be performed, while flame cutting can only be used for vertical cutting;
4 High yield rate and low overall cost
First of all, the cut surface of the wire saw is very flat and will not cause any internal damage to the block;
Secondly, the saw seam is small, only about 11mm, which will not cause waste of resources;
The flame cutting surface is rough and uneven, and it causes certain internal damage to the block, and the saw seam is large, generally 100~300mm, which causes a lot of waste of resources and high mining costs;
5 is safe and environmentally friendly
Wire saw mining is noise-free and dust-free, does not affect nearby residents and other work operations, and has a high degree of automation, separate operation, low labor intensity and high safety;
The flame cutting noise and dust are very loud, which seriously affects the operations of other workers in nearby residents, and the workers have high labor intensity and relatively low safety.
