WANLONG
Diamond wire saw is a commonly used tool in stone processing. It has the advantages of high efficiency and environmental protection, and is welcomed by stone merchants. So what are the machines suitable for cutting stone with a diamond wire saw?
Quarry wire sawing machine used in block mining
Quarry wire sawing machine is a more common model in the mining process. The main structure is the fuselage, upper and lower flywheels and tracks. The inside of the fuselage is mainly a motor, which drives the transmission wheel to rotate through the motor. In the actual wire saw cutting process, the transmission wheel drives the wire saw to complete the cutting work of the quarry. The flywheel mainly plays the role of expanding the cutting angle. The larger cutting angle can effectively reduce the bending of the beaded wire saw, thereby prolonging the service life of the wire saw and reducing the beaded wire. Risk of falling beads. The gauge section is the track for the jigsaw to move backwards. Through the adjustable angle track, the wire saw machine can complete cutting at any angle, adjust the track angle in time, and let the wire saw cut. Face shapes are more diverse.
Quarry wire sawing machines generally use motors with rated powers of 35KW, 37KW, 55KW, and 75KW. The power depends on the size of the cut surface of the stone and the hardness of the stone. For example, when cutting large blocks of more than 100 square meters, choose a 75KW machine. It is best to avoid damage to the machine due to excessive load caused by the power of the machine, but if cutting small surfaces, then 35KW, and even some 27KW machines on the market can be used.
Block trimming wire saw machine
This wire saw is mainly used in stone factories. Its structure is very simple. The flywheel is fixed on both sides. During the cutting process, the wire saw completes the cut from top to bottom, and can process stones with irregular edges into blocks with smooth edges. In order to facilitate the later cutting of the block. During the cutting process, one or more sides of the block can be trimmed by turning the table and the lathe of the trimming wire saw. The saw is generally trimmed directly with a mining wire saw machine. If the stone is mined with a wire saw or a mining saw, it does not need to be trimmed.
Special-shaped CNC wire saw machine
This wire saw machine is mainly used in stone factories. CNC machining is adopted. This machine can cut almost any shape of stone or plate. Compared to water jet, this processing method can be applied to large stones. On the other hand, the scope of application is wider. Special-shaped stone processing machinery mainly cuts large stone three-dimensional sculptures, stone tombstones, roadside stones, stone piers, text sculptures, solid hollow large columns, and plate hollow patterns through wire saws, and can even be used for countertops, curved stone edges Cutting of corners etc. The stone factory has such a machine that can complete a variety of tasks, so it is also widely accepted at present.
Multi Wire Saw Machine
Currently, there are very few manufacturers of such machines in the world. Only some manufacturers in Italy and China can produce such machines. Multiple wire saw cutting can greatly speed up the processing efficiency of stone to plate and greatly reduce the waste of raw materials. For the frame saw, there is still a little gap in terms of material saving, but its cutting efficiency and stone versatility can completely make up for its shortcomings, but the high price is still prohibitive.
In addition to the above-mentioned wire saw machines, in fact, hydraulic wire saw machines also have a good dosage, but due to the limited cutting method, high price and low efficiency, the utilization rate of this kind of machinery is not high.
