WANLONG
Precautions for trimming machines:
1. When the machine is not operating normally or an accident occurs, the machine should be stopped immediately and the air should be cut off for maintenance.
2. This machine shall not be used for other purposes except for the specified purpose.
3. This machine is operated by one person, please pay attention to safety when using it.
4. Non-operating personnel should not get too close to the machine, let alone put their bodies into the machine.
5. Non-technical personnel are strictly prohibited from adjusting the machine to avoid accidents.
Matters for machine installation and debugging:
1. The machine is placed on a hard workbench and the machine should be kept horizontal as much as possible;
2. When adjusting the knife position, pay attention to the alignment of the upper and lower knife edges. It is best to reduce the air pressure to adjust the knife position;
3. The linear bearing is a precision component of this machine and cannot be knocked;
4. Adjust the appropriate shearing speed.
