What are the advantages of diamond wire saw

What are the advantages of diamond wire saw? With the continuous development and expansion of the stone industry market, the cutting requirements for the stone industry are getting higher and higher, which requires continuous improvement of cutting technology. The emergence of diamond wire saws is favored by customers in the industry.

Wire saw is a cutting and dismantling tool for mines, blocks, curved slabs, large slabs of stone, thick concrete, irregular concrete steel bars, bridges and roads, etc. It is easy to install and flexible to use. It can be cut horizontally or vertically.

So why is the diamond wire saw so popular? 

1. Compared with other diamond tools, the diamond wire saw is a flexible tool, which can not only be used to cut straight plates, but also special-shaped plates;

2. Not limited by the shape of the surface of the object, the requirements of the workplace are simple, and a large area can be cut;

3. The use of diamond wire saw can improve resource utilization and reduce environmental pollution.

Due to these advantages, its market scale is getting bigger and bigger, and its application range is getting wider and wider. With the advancement of technology, diamond wire saws are also constantly being developed, improved and innovated. Today’s diamond wire saws can greatly improve the performance of wire saws. Comprehensive performance, the large-scale use of high-performance diamond wire saws is of great significance for improving the utilization rate of stone resources, reducing the cutting cost per unit area and protecting the ecological environment.

Click ===》》》 Wanlong Diamond Wire Saw Products

The wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing.

Three essential components for diamond wire saw are as followed:

1. Steel cable with diefferent diameter depending on the application

2. Sintered diamond beads.

3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone.

Ours advantages:

1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.

2. Good cutting with small slot.

3. Few breakage raito at working thus sound lifetime.

4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.

5. Other specifications are available upon request.

Attention:

1. Regular inspections of diamond wire self rotation and adjust in time.

2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.

3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time

4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm)

5. Linear speed is ajusted according to stones hardness.

6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.